Add clean corners and professional edges to your composite decking project with our coordinating Edge Trim. Perfectly finishing any rough deck edges, the trim sits over the edge of the deck, covering corners and concealing joins where horizontal decking boards meet vertical fascia boards, hollow board ends or the groove down the side of the decking.
The L-shaped Edge Trims have a bevelled edge to prevent trips and falls and an attractive sanded finish to complement our composite decking boards. Easy to install, the Edge Trims can be predrilled and screwed through, or for a flawless finish, they can be securely attached with outdoor adhesive.
Edging Trims are a lower cost alternative to Bullnose Edging but leave a slight lip over the decking. For a more premium, flush finish, choose Bullnose Edging.










Does the job, and is a necessary addition. However, if using on inner not outer corners there is no pattern on the inner side, just smooth black plastic! They don’t sell inner corner trims either so you’ll have to cut along the top edge and glue them together the opposite way. Also they are bevelled along the edge but not at the ends, so if joining together vertical and horizontal trims you get a weird gap which requires more DIY amendment.
From start to finish the customer dervice eas first class
As was all the help & advice i wad given
Finished off our project nicely and a professional look
Great product, good luck parking!
Firs perfect and looks excellent